Everything About Robotic Knee Replacement

A robotic knee replacement is similar to a standard knee replacement in that it replaces the knee joint. Damaged tissue in your knee is removed and replaced with an artificial joint by your surgeon. The only difference is that it’s made with the help of a robotic arm.

Everything About Robotic Total Knee Replacement and its Treatment

A robotic knee replacement is similar to a standard knee replacement in that it replaces the knee joint. Damaged tissue in your knee is removed and replaced with an artificial joint by your surgeon. The only difference is that it's made with the help of a robotic arm.

Arthroscopic rotator cuff repair

  • This procedure is done in case of rotator cuff injuries following fall with injury to shoulder and sports injuries
  • The procedure is usually done under general anesthesia.
  • Tendons are reattached to bone (head of arm bone) using rivets known as suture anchors under the vision of arthroscope.
  • They may be metal or bio absorbable and need not be removed, with sutures attached to them for tying the tendons.
  • After surgery rehabilitation is started after 2 weeks and graduated physiotherapy is done for 2 months.

Arthroscopic rotator cuff repair

  • This procedure is done in case of rotator cuff injuries following fall with injury to shoulder and sports injuries
  • The procedure is usually done under general anesthesia.
  • Tendons are reattached to bone (head of arm bone) using rivets known as suture anchors under the vision of arthroscope.
  • They may be metal or bio absorbable and need not be removed, with sutures attached to them for tying the tendons.
  • After surgery rehabilitation is started after 2 weeks and graduated physiotherapy is done for 2 months.

Arthroscopic assisted Latarjet

  • This procedure is done in patients having recurrent shoulder dislocation.
  • This procedure is usually done under general anaesthesia.
  • Capsule is reattached to bone (shoulder blade) using rivets known as suture anchors under the vision of arthroscope.
  • After surgery rehabilitation is started after 2 weeks and graduated physiotherapy is done for 2 months.

Arthroscopic assisted Latarjet

  • This procedure is done in patients having recurrent shoulder dislocation.
  • This procedure is usually done under general anaesthesia.
  • Capsule is reattached to bone (shoulder blade) using rivets known as suture anchors under the vision of arthroscope.
  • After surgery rehabilitation is started after 2 weeks and graduated physiotherapy is done for 2 months.

Arthroscopic AC joint repair

  • This procedure is done in patients with dislocation of joint between clavicle (collar bone) and acromion (projection of shoulder blade).
  • This procedure is usually done under general anaesthesia
  • 2 or 3 very small incisions are made. A separate 2cm mini-open incision is made over collar bone to complete fixation.
  • Strong fibre-tape passed through a small drill hole in collar bone and coracoid process of shoulder blade.
  • The tapes are looped and tightened over small titanium button, which pull the collar bone down to its correct position.
  • The tape holds the joint in correct place while the injured ligaments heal.
  • After surgery rehabilitation is started after 2 weeks and graduated physiotherapy is done for 2 months.

Arthroscopic frozen shoulder release

  • This procedure is done in patients with stiff shoulder/ frozen shoulder.
  • This procedure is usually done under general anaesthesia.
  • An area at the front of the shoulder called rotator interval is completely cleared of inflamed thickened capsule.
  • Anterior and superior part of capsule is released (like perforations on a piece of paper).
  • This may be accompanied with manipulation/passive mobilisation of shoulder.
  • After surgery physiotherapy for shoulder mobilisation is started from next day.

Recovery Rate

Recovery may require one to six months. For the first week, you'll probably have to wear a sling. You might need to wear the sling for a longer period if you had extensive repairs made. To manage your pain, you may take medication.

Arthroscopic Bankart repair

  • This procedure is done in patients with recurrent shoulder dislocation with bony defect of the shoulder blade and/or head of arm bone.
  • This procedure is usually done under general anesthesia
  • Part of the Coracoid process (bony projection) present over the front of the shoulder blade is taken and passed through the Subscapularis muscle by splitting it.
  • It is fixed to the front of the shoulder near the neck of the shoulder blade with screws to repair the bony defect causing instability.
  • After surgery rehabilitation is started after 2 weeks and graduated physiotherapy is done for 2 months

Arthroscopic AC joint repair

  • This procedure is done in patients with dislocation of joint between clavicle (collar bone) and acromion (projection of shoulder blade).
  • This procedure is usually done under general anaesthesia
  • 2 or 3 very small incisions are made. A separate 2cm mini-open incision is made over collar bone to complete fixation.
  • Strong fibre-tape passed through a small drill hole in collar bone and coracoid process of shoulder blade.
  • The tapes are looped and tightened over small titanium button, which pull the collar bone down to its correct position.
  • The tape holds the joint in correct place while the injured ligaments heal.
  • After surgery rehabilitation is started after 2 weeks and graduated physiotherapy is done for 2 months.

Arthroscopic frozen shoulder release

  • This procedure is done in patients with stiff shoulder/ frozen shoulder.
  • This procedure is usually done under general anaesthesia.
  • An area at the front of the shoulder called rotator interval is completely cleared of inflamed thickened capsule.
  • Anterior and superior part of capsule is released (like perforations on a piece of paper).
  • This may be accompanied with manipulation/passive mobilisation of shoulder.
  • After surgery physiotherapy for shoulder mobilisation is started from next day.

Recovery Rate

Recovery may require one to six months. For the first week, you'll probably have to wear a sling. You might need to wear the sling for a longer period if you had extensive repairs made. To manage your pain, you may take medication

Causes

  • Arthritis.
  • Cartilage injury.
  • Rotator cuff injury.
  • Swollen tendons or bursa sacs.
  • Bone growths (bony projections that develop along the edges of bones)
  • Shoulder or neck pinched nerve.
  • Fractured arm or shoulder bone.
  • Fractured arm or shoulder bone. shoulder.

Symptoms

  • Radiating shoulder pain.
  • Sleepless nights due to pain.
  • Weakness in the affected arm.
  • Pain continues without physical activity.
  • Lifting and reaching are impaired.

Causes

  • Arthritis.
  • Cartilage injury.
  • Rotator cuff injury.
  • Swollen tendons or bursa sacs.
  • Bone growths (bony projections that develop along the edges of bones)
  • Shoulder or neck pinched nerve.
  • Fractured arm or shoulder bone.
  • Fractured arm or shoulder bone. shoulder.

Symptoms

  • Radiating shoulder pain.
  • Sleepless nights due to pain.
  • Weakness in the affected arm.
  • Pain continues without physical activity.
  • Lifting and reaching are impaired.

Diagnosis

Diagnosis

Risks & Complications

Benefits of Advanced Shoulder Arthroscopy

Benefits of Advanced Shoulder Arthroscopy

Risks & Complications

When to consult a doctor ?

Consult your surgeon as soon as you experience :

In order to determine whether GI and HPB surgery is right for them, a person may have symptoms from conditions like:

  • Stomach pain and inflammation
  • Gastrointestinal or duodenal
  • H. pylori infection.
  • Disease of gastroesophageal reflux (GERD)
  • Stomach ulcers (sores)

Our Specialist

***

When to consult a doctor ?

Consult your surgeon as soon as you experience :

In order to determine whether GI and HPB surgery is right for them, a person may have symptoms from conditions like:

  • Stomach pain and inflammation
  • Gastrointestinal or duodenal
  • H. pylori infection.
  • Disease of gastroesophageal reflux (GERD)
  • Stomach ulcers (sores)

Our Specialist

***

Insurance coverage

Insurance does cover the cost of the surgical procedure for a hysterectomy performed due to adenomyosis because it is on the list of procedures that are "medically required." The cost capping, however, may change from instance to case. Please get your healthcare or insurance company to validate this.

Insurance coverage

Insurance does cover the cost of the surgical procedure for a hysterectomy performed due to adenomyosis because it is on the list of procedures that are "medically required." The cost capping, however, may change from instance to case. Please get your healthcare or insurance company to validate this.

Frequently Asked Questions

  • 1. Are there differences between an arthroscopic and open rotator cuff repair?

    An arthroscopic rotator cuff repair and an open rotator cuff repair are two different surgical techniques used to repair a torn rotator cuff. The main difference between the two techniques is the way the surgery is performed.

     

    An arthroscopic rotator cuff repair is a minimally invasive surgical technique that uses small keyhole incisions and specialized instruments, including a tiny cylindrical camera called an arthroscope, to repair the torn rotator cuff. In contrast, an open rotator cuff repair involves making a larger incision in the shoulder to access and repair the torn rotator cuff.

     

    There are several potential advantages to arthroscopic rotator cuff repair compared to open surgery. These include an early recovery, less pain, fewer complications, and a smaller scar. However, arthroscopic surgery may not be suitable for all types of rotator cuff tears or for all patients. Your doctor will be able to provide more information about the best surgical approach for your specific situation.

  • 2. How should I manage my surgical site, dressing and steri-strips?
    • If necessary, change your clothes every day.
    • Let the steri-strips come off naturally. At your initial post-operative visit, sutures will potentially be removed.
    • In two days, you can take a shower with a watertight bandage, but until the sutures are removed in 12 to 14 days, keep the incisions dry. Avoid letting the showerhead's direct water stream touch the incision.
  • 3. Do I need to wear an immobilizer? If so, how long do I wear it and when can I take it off during the day?
    • Depending on the degree of your tear and the subsequent extent of the rotator cuff repair, your surgeon will advise you to wear your shoulder immobilizer for four to six weeks. The immobilizer should be worn at all times.
    • When wearing a sling, your elbow should be bent at a straight angle, and your hand should be at or just above elbow level. You should have your elbow resting just in front of your torso.
    • The surgeon's or therapist's recommended exercises, icing, dressing, and showering can all be done without the sling on.
    •  
  • 4. How are Bankart Tears Diagnosed?

    Bankart tears are typically diagnosed through a physical examination and imaging tests, such as an MRI. During the physical examination, the doctor will assess the stability of the shoulder and check for signs of a Bankart tear, such as pain and tenderness in the shoulder joint. Imaging tests, such as an MRI, can then be used to confirm the diagnosis and determine the extent of the tear.

  • 5. What is Arthroscopic Bankart Repair?

    A tiny video camera called an arthroscope is used in the minimally invasive treatment known as arthroscopic bankart repair to treat bankart lesions. These injuries result from labrum rips, which lead to shoulder joint instability, discomfort, and frequent dislocations. The thick band of cartilage that surrounds the shoulder socket is called the labrum. Overuse or falling on an outstretched hand can cause this injury.

     

    Only after more conventional therapy options have failed is this operation performed. The damaged shoulder will typically need to be immobilised in a sling, rest, and physical therapy before being released.

     

    In open approach requires cutting and reattaching the muscles, the overlying shoulder, during the process. Patients report having the same or greater range of motion as before the injury after the arthroscopic operation with little to no pain or inflammation at the damage site.

  • 6. What is Arthroscopic assisted Latarjet?

    Arthroscopic-assisted Latarjet is a surgical procedure used to treat recurrent shoulder dislocation with ……….. defect, specifically when the traditional Latarjet procedure is not an option. In this procedure, an arthroscope (a small camera) is used to assist the surgeon in performing the Latarjet procedure, which involves transferring a piece of bone and tissue from the person's own body and fixed to front of their shoulder joint with screws to help stabilize the joint. This will help reduce instability and improve the function of the

  • 7. What is the procedure for Arthroscopic assisted Latarjet?

    The exact procedure for arthroscopic-assisted Latarjet may vary depending on the individual case, but generally, the procedure involves the following steps:

     

    • The person is given general anesthesia to make them unconscious and pain-free during the surgery.
    • The surgeon makes a small keyhole incision over the shoulder joint and inserts an arthroscope (a small camera) into the joint to get a clear view of the area.
    • Using the arthroscope as a guide, the surgeon performs the Latarjet procedure, which involves transferring a piece of bone and tissue from the person's own body to the front of the shoulder joint.
    • The transferred bone and tissue are anchored into place with screws or other fixation devices to help stabilize the shoulder joint.
    • The incisions are closed with stitches or staples, and the person is taken to a recovery room to be monitored after the surgery.

    Overall, the arthroscopic-assisted Latarjet procedure typically takes about one to two hours to complete, depending on the complexity of the case. The person will need to stay in the hospital for a 1 or 2 days after the surgery, and they will need to follow a physical therapy program to help regain strength and range of motion in their shoulder.

  • 8. What is my recovery after Arthroscopic assisted Latarjet surgery?

    The recovery process after arthroscopic-assisted Latarjet surgery will vary depending on the individual person and the specifics of their surgery. In general, the person can expect to experience some pain and discomfort in the shoulder for the first few days after the surgery, which can be managed with pain medication. The person's arm may be in a sling or other type of immobilization device for the first few weeks to help protect the shoulder and allow it to heal properly.

     

    After the initial healing period, the person will need to undergo a physical therapy program to help regain strength and range of motion in their shoulder. This will typically involve a combination of exercises and other treatments to help the person gradually rebuild strength and function in their shoulder. The physical therapy program will be tailored to the person's specific needs and goals, and it may take several months to complete.

     

    Overall, the recovery process after arthroscopic-assisted Latarjet surgery can take several months, but most people are able to return to their normal activities and achieve a good level of shoulder function after completing the physical therapy program. It is important for the person to follow their doctor's instructions and attend all of their physical therapy appointments to ensure the best possible outcome.

  • 9. What is Arthroscopic AC joint repair?

    Arthroscopic AC joint repair is a surgical procedure that is performed using an arthroscope, a small camera that is inserted into the joint through a keyhole incision. The purpose of the surgery is to repair damage to the acromioclavicular (AC) joint, which is the joint that connects the acromion (a bony prominence on the shoulder blade) and the clavicle (collarbone). The AC joint can be damaged due to a variety of reasons, including trauma, overuse, and degenerative changes. The arthroscopic AC joint repair procedure is used to repair the damage and restore the normal function of the joint.

  • 10. How is AC joint dislocation diagnosed and what is the procedure for Arthroscopic AC joint repair?

    During the diagnosis phase, the doctor will perform a physical examination of the shoulder to assess the stability of AC joint and identify any areas of tenderness or swelling. They may also order imaging tests, such as X-rays or an MRI, to get a better look at the structure of the AC joint and determine the extent of the damage.

     

    Once the diagnosis is made and the decision is made to proceed with surgery, the arthroscopic AC joint repair procedure will be performed under general anaesthesia. During the surgery, the doctor will make several small keyhole incisions around the joint and insert the arthroscope through one of the incisions. The camera on the arthroscope allows the doctor to see the inside of the joint and perform the repair using small surgical instruments that are inserted through the other incisions.

     

    The specific steps of the surgery will depend on the type and extent of the damage to the AC joint. In some cases, the damaged parts of the joint may be removed or reshaped to restore the normal alignment of the joint. In other cases, the joint may be stabilized using sutures or other surgical hardware. Once the repair is complete, the incisions will be closed and the shoulder will be immobilized in a sling or shoulder immobilizer to allow it to heal.

     

    After the surgery, the patient will need to follow a physical therapy program to help regain strength and range of motion in the shoulder. This will typically involve a combination of exercises and other techniques to improve the function of the joint and prevent stiffness. With proper care and rehabilitation, most people are able to return to their normal activities within a few months after the surgery.

  • 11. What will be the preparation for surgery (if required)?

    Make sure your doctor is aware of all of the following things before having shoulder surgery:

     

    • All medical conditions, including those not previously reported
    • All allergies
    • Any drugs you are taking
    • Any bleeding issues.
    • Status of pregnancy

     

    The night before surgery, you must refrain from eating or drinking after midnight. You should not take any drugs the day before surgery unless instructed to. Aspirin and anti-inflammatory drugs such Advil, Motrin, Ibuprofen, and Aleve should be avoided for 5-7 days prior to surgery since they may prevent blood clotting.

  • 12. What is Arthroscopic frozen shoulder release?

    Arthroscopic frozen shoulder release is a surgical procedure that is used to treat a condition called frozen shoulder, also known as adhesive capsulitis. In this condition, the shoulder joint becomes stiff and painful, making it difficult to move the arm. During an arthroscopic frozen shoulder release, a surgeon will make a small keyhole incision in the shoulder and insert small camera called an arthroscope. The arthroscope is equipped with a light and a camera, which the surgeon uses to visualize the inside of the joint. The surgeon can then use small instruments to release the tight tissue around the shoulder joint, allowing for improved movement and reduced pain.

  • 13. How is frozen shoulder diagnosed and What is the procedure of Arthroscopic frozen shoulder release?

    The diagnosis of frozen shoulder is typically made based on a person's symptoms and a physical examination by a doctor. In some cases, imaging tests such as an X-ray or MRI may be used to confirm the diagnosis and rule out other conditions.

     

    Once a diagnosis of frozen shoulder has been made, the doctor will discuss treatment options with the patient. In some cases, non-surgical treatments such as physical therapy or pain medication may be sufficient to manage the condition. However, if these treatments are not effective, arthroscopic frozen shoulder release may be recommended.

     

    The procedure for arthroscopic frozen shoulder release is typically performed under general anaesthesia. The surgeon will make a small keyhole incision in the shoulder and insert a small camera called arthroscope. The arthroscope will be used to visualize the inside of the joint, and the surgeon will use small instruments to release the tight tissue around the joint. The procedure typically takes about an hour to complete. After the surgery, the patient will be taken to a recovery room where they will be monitored until they are awake and alert. It is important to follow the doctor's instructions for post-surgical care, which may include physical therapy to help regain strength and range of motion in the shoulder.

  • 14. What are the common symptoms of Frozen Shoulder?

    Frozen shoulder, also known as adhesive capsulitis, is a condition that causes stiffness and pain in the shoulder joint. Common symptoms of frozen shoulder include:

     

    • Pain in the shoulder, which may be sharp or dull
    • Stiffness in the shoulder joint, making it difficult to move the arm
    • Limited range of motion in the shoulder, such as difficulty reaching overhead or behind the back
    • A feeling of "catching" or "grinding" in the shoulder joint when moving the arm
    • It is common in person with diabetes

     

    These symptoms may gradually worsen over time, and may also be accompanied by weakness in the arm or shoulder. The symptoms of frozen shoulder may be worse at night, and may interfere with a person's ability to sleep. In severe cases, frozen shoulder can cause significant disability and may require surgical treatment.

  • 15. What to Expect on the day of the Arthroscopic frozen shoulder release surgery?

    On the day of an arthroscopic frozen shoulder release surgery. They will be asked to change into a hospital gown and may be asked to remove any jewellery or other objects that could interfere with the surgery. The patient will also be asked to sign a consent form. The patient will be given general anaesthesia.

     

    The surgeon will make a small keyhole incision in the shoulder and insert the arthroscope. The arthroscope is a thin, tube equipped with a light and a camera, which the surgeon will use to visualize the inside of the joint. The surgeon will then use small instruments to release the tight tissue around the shoulder joint, allowing for improved movement and reduced pain. The procedure typically takes about an hour to complete.

     

    After the surgery, the patient will be taken to a recovery room where they will be monitored until they are awake and alert. They will be given pain medication to help manage any discomfort, and may be asked to move their arm to help prevent stiffness. The patient will be discharged It is important to follow the doctor's instructions for post-surgical care, which may include physical therapy to help regain strength and range of motion in the shoulder.

  • Frequently Asked Questions

  • 1. Are there differences between an arthroscopic and open rotator cuff repair?

    An arthroscopic rotator cuff repair and an open rotator cuff repair are two different surgical techniques used to repair a torn rotator cuff. The main difference between the two techniques is the way the surgery is performed.

     

    An arthroscopic rotator cuff repair is a minimally invasive surgical technique that uses small keyhole incisions and specialized instruments, including a tiny cylindrical camera called an arthroscope, to repair the torn rotator cuff. In contrast, an open rotator cuff repair involves making a larger incision in the shoulder to access and repair the torn rotator cuff.

     

    There are several potential advantages to arthroscopic rotator cuff repair compared to open surgery. These include an early recovery, less pain, fewer complications, and a smaller scar. However, arthroscopic surgery may not be suitable for all types of rotator cuff tears or for all patients. Your doctor will be able to provide more information about the best surgical approach for your specific situation.

  • 2. How should I manage my surgical site, dressing and steri-strips?
    • If necessary, change your clothes every day.
    • Let the steri-strips come off naturally. At your initial post-operative visit, sutures will potentially be removed.
    • In two days, you can take a shower with a watertight bandage, but until the sutures are removed in 12 to 14 days, keep the incisions dry. Avoid letting the showerhead's direct water stream touch the incision.
  • 3. Do I need to wear an immobilizer? If so, how long do I wear it and when can I take it off during the day?
    • Depending on the degree of your tear and the subsequent extent of the rotator cuff repair, your surgeon will advise you to wear your shoulder immobilizer for four to six weeks. The immobilizer should be worn at all times.
    • When wearing a sling, your elbow should be bent at a straight angle, and your hand should be at or just above elbow level. You should have your elbow resting just in front of your torso.
    • The surgeon's or therapist's recommended exercises, icing, dressing, and showering can all be done without the sling on.
    •  
  • 4. How are Bankart Tears Diagnosed?

    Bankart tears are typically diagnosed through a physical examination and imaging tests, such as an MRI. During the physical examination, the doctor will assess the stability of the shoulder and check for signs of a Bankart tear, such as pain and tenderness in the shoulder joint. Imaging tests, such as an MRI, can then be used to confirm the diagnosis and determine the extent of the tear.

  • 5. What is Arthroscopic Bankart Repair?

    A tiny video camera called an arthroscope is used in the minimally invasive treatment known as arthroscopic bankart repair to treat bankart lesions. These injuries result from labrum rips, which lead to shoulder joint instability, discomfort, and frequent dislocations. The thick band of cartilage that surrounds the shoulder socket is called the labrum. Overuse or falling on an outstretched hand can cause this injury.

     

    Only after more conventional therapy options have failed is this operation performed. The damaged shoulder will typically need to be immobilised in a sling, rest, and physical therapy before being released.

     

    In open approach requires cutting and reattaching the muscles, the overlying shoulder, during the process. Patients report having the same or greater range of motion as before the injury after the arthroscopic operation with little to no pain or inflammation at the damage site.

  • 6. What is Arthroscopic assisted Latarjet?

    Arthroscopic-assisted Latarjet is a surgical procedure used to treat recurrent shoulder dislocation with ……….. defect, specifically when the traditional Latarjet procedure is not an option. In this procedure, an arthroscope (a small camera) is used to assist the surgeon in performing the Latarjet procedure, which involves transferring a piece of bone and tissue from the person's own body and fixed to front of their shoulder joint with screws to help stabilize the joint. This will help reduce instability and improve the function of the

  • 7. What is the procedure for Arthroscopic assisted Latarjet?

    The exact procedure for arthroscopic-assisted Latarjet may vary depending on the individual case, but generally, the procedure involves the following steps:

     

    • The person is given general anesthesia to make them unconscious and pain-free during the surgery.
    • The surgeon makes a small keyhole incision over the shoulder joint and inserts an arthroscope (a small camera) into the joint to get a clear view of the area.
    • Using the arthroscope as a guide, the surgeon performs the Latarjet procedure, which involves transferring a piece of bone and tissue from the person's own body to the front of the shoulder joint.
    • The transferred bone and tissue are anchored into place with screws or other fixation devices to help stabilize the shoulder joint.
    • The incisions are closed with stitches or staples, and the person is taken to a recovery room to be monitored after the surgery.

    Overall, the arthroscopic-assisted Latarjet procedure typically takes about one to two hours to complete, depending on the complexity of the case. The person will need to stay in the hospital for a 1 or 2 days after the surgery, and they will need to follow a physical therapy program to help regain strength and range of motion in their shoulder.

  • 8. What is my recovery after Arthroscopic assisted Latarjet surgery?

    The recovery process after arthroscopic-assisted Latarjet surgery will vary depending on the individual person and the specifics of their surgery. In general, the person can expect to experience some pain and discomfort in the shoulder for the first few days after the surgery, which can be managed with pain medication. The person's arm may be in a sling or other type of immobilization device for the first few weeks to help protect the shoulder and allow it to heal properly.

     

    After the initial healing period, the person will need to undergo a physical therapy program to help regain strength and range of motion in their shoulder. This will typically involve a combination of exercises and other treatments to help the person gradually rebuild strength and function in their shoulder. The physical therapy program will be tailored to the person's specific needs and goals, and it may take several months to complete.

     

    Overall, the recovery process after arthroscopic-assisted Latarjet surgery can take several months, but most people are able to return to their normal activities and achieve a good level of shoulder function after completing the physical therapy program. It is important for the person to follow their doctor's instructions and attend all of their physical therapy appointments to ensure the best possible outcome.

  • 9. What is Arthroscopic AC joint repair?

    Arthroscopic AC joint repair is a surgical procedure that is performed using an arthroscope, a small camera that is inserted into the joint through a keyhole incision. The purpose of the surgery is to repair damage to the acromioclavicular (AC) joint, which is the joint that connects the acromion (a bony prominence on the shoulder blade) and the clavicle (collarbone). The AC joint can be damaged due to a variety of reasons, including trauma, overuse, and degenerative changes. The arthroscopic AC joint repair procedure is used to repair the damage and restore the normal function of the joint.

  • 10. How is AC joint dislocation diagnosed and what is the procedure for Arthroscopic AC joint repair?

    During the diagnosis phase, the doctor will perform a physical examination of the shoulder to assess the stability of AC joint and identify any areas of tenderness or swelling. They may also order imaging tests, such as X-rays or an MRI, to get a better look at the structure of the AC joint and determine the extent of the damage.

     

    Once the diagnosis is made and the decision is made to proceed with surgery, the arthroscopic AC joint repair procedure will be performed under general anaesthesia. During the surgery, the doctor will make several small keyhole incisions around the joint and insert the arthroscope through one of the incisions. The camera on the arthroscope allows the doctor to see the inside of the joint and perform the repair using small surgical instruments that are inserted through the other incisions.

     

    The specific steps of the surgery will depend on the type and extent of the damage to the AC joint. In some cases, the damaged parts of the joint may be removed or reshaped to restore the normal alignment of the joint. In other cases, the joint may be stabilized using sutures or other surgical hardware. Once the repair is complete, the incisions will be closed and the shoulder will be immobilized in a sling or shoulder immobilizer to allow it to heal.

     

    After the surgery, the patient will need to follow a physical therapy program to help regain strength and range of motion in the shoulder. This will typically involve a combination of exercises and other techniques to improve the function of the joint and prevent stiffness. With proper care and rehabilitation, most people are able to return to their normal activities within a few months after the surgery.

  • 11. What will be the preparation for surgery (if required)?

    Make sure your doctor is aware of all of the following things before having shoulder surgery:

     

    • All medical conditions, including those not previously reported
    • All allergies
    • Any drugs you are taking
    • Any bleeding issues.
    • Status of pregnancy

     

    The night before surgery, you must refrain from eating or drinking after midnight. You should not take any drugs the day before surgery unless instructed to. Aspirin and anti-inflammatory drugs such Advil, Motrin, Ibuprofen, and Aleve should be avoided for 5-7 days prior to surgery since they may prevent blood clotting.

  • 12. What is Arthroscopic frozen shoulder release?

    Arthroscopic frozen shoulder release is a surgical procedure that is used to treat a condition called frozen shoulder, also known as adhesive capsulitis. In this condition, the shoulder joint becomes stiff and painful, making it difficult to move the arm. During an arthroscopic frozen shoulder release, a surgeon will make a small keyhole incision in the shoulder and insert small camera called an arthroscope. The arthroscope is equipped with a light and a camera, which the surgeon uses to visualize the inside of the joint. The surgeon can then use small instruments to release the tight tissue around the shoulder joint, allowing for improved movement and reduced pain.

  • 13. How is frozen shoulder diagnosed and What is the procedure of Arthroscopic frozen shoulder release?

    The diagnosis of frozen shoulder is typically made based on a person's symptoms and a physical examination by a doctor. In some cases, imaging tests such as an X-ray or MRI may be used to confirm the diagnosis and rule out other conditions.

     

    Once a diagnosis of frozen shoulder has been made, the doctor will discuss treatment options with the patient. In some cases, non-surgical treatments such as physical therapy or pain medication may be sufficient to manage the condition. However, if these treatments are not effective, arthroscopic frozen shoulder release may be recommended.

     

    The procedure for arthroscopic frozen shoulder release is typically performed under general anaesthesia. The surgeon will make a small keyhole incision in the shoulder and insert a small camera called arthroscope. The arthroscope will be used to visualize the inside of the joint, and the surgeon will use small instruments to release the tight tissue around the joint. The procedure typically takes about an hour to complete. After the surgery, the patient will be taken to a recovery room where they will be monitored until they are awake and alert. It is important to follow the doctor's instructions for post-surgical care, which may include physical therapy to help regain strength and range of motion in the shoulder.

  • 14. What are the common symptoms of Frozen Shoulder?

    Frozen shoulder, also known as adhesive capsulitis, is a condition that causes stiffness and pain in the shoulder joint. Common symptoms of frozen shoulder include:

     

    • Pain in the shoulder, which may be sharp or dull
    • Stiffness in the shoulder joint, making it difficult to move the arm
    • Limited range of motion in the shoulder, such as difficulty reaching overhead or behind the back
    • A feeling of "catching" or "grinding" in the shoulder joint when moving the arm
    • It is common in person with diabetes

     

    These symptoms may gradually worsen over time, and may also be accompanied by weakness in the arm or shoulder. The symptoms of frozen shoulder may be worse at night, and may interfere with a person's ability to sleep. In severe cases, frozen shoulder can cause significant disability and may require surgical treatment.

  • 15. What to Expect on the day of the Arthroscopic frozen shoulder release surgery?

    On the day of an arthroscopic frozen shoulder release surgery. They will be asked to change into a hospital gown and may be asked to remove any jewellery or other objects that could interfere with the surgery. The patient will also be asked to sign a consent form. The patient will be given general anaesthesia.

     

    The surgeon will make a small keyhole incision in the shoulder and insert the arthroscope. The arthroscope is a thin, tube equipped with a light and a camera, which the surgeon will use to visualize the inside of the joint. The surgeon will then use small instruments to release the tight tissue around the shoulder joint, allowing for improved movement and reduced pain. The procedure typically takes about an hour to complete.

     

    After the surgery, the patient will be taken to a recovery room where they will be monitored until they are awake and alert. They will be given pain medication to help manage any discomfort, and may be asked to move their arm to help prevent stiffness. The patient will be discharged It is important to follow the doctor's instructions for post-surgical care, which may include physical therapy to help regain strength and range of motion in the shoulder.

  • Facts and figures around robotic hip replacement

    Why choose Aasra for robotic knee replacement treatment?

    AASRA Hospital has the state of the art technology for performing joint replacement surgeries i,e MAKO Robitic joint replacement technology.
    There is less post operative pain, reduced hospital stay ,patient can walk early and early recovery .

    How to book appointment for aasra

    Booking an appointment with a Aasra  Orthopedician is easy. 

    Simply give us a call directly or complete our online appointment booking form. The only four questions it would ask you are “Your name,” “Contact,” and “tell us a little more about yourself.” Simply complete the form and press “submit.” One of our medical coordinators will give you a call soon to assist you in speaking with the doctor of your choice.

    Facts and figures around robotic hip replacement

    Why choose Aasra for robotic hip replacement treatment?

    AASRA Hospital has the state of the art technology for performing joint replacement surgeries i,e MAKO Robitic joint replacement technology.
    There is less post operative pain, reduced hospital stay ,patient can walk early and early recovery .

    How to book an appointment for aasra?

    Booking an appointment with a Aasra  Orthopedician is easy. 

    Simply give us a call directly or complete our online appointment booking form. The only four questions it would ask you are “Your name,” “Contact,” and “tell us a little more about yourself.” Simply complete the form and press “submit.” One of our medical coordinators will give you a call soon to assist you in speaking with the doctor of your choice.

    Open chat
    1
    Hii👋
    How Can we help you?